Gordon Brothers is Australia’s leading distributor of Kluber’s industrial refrigeration range of lubricants. Kluber Lubrication has a range of 2,000 products including oils, greases, bonded coatings, pastes and dry lubricants.

    Check out some of their range balow.

    Klüber Summit R Series

    Benefits

    Klüber Summit R series lubricants have been designed especially for highly loaded screw-type and reciprocating piston compressors which are operated with ammonia (R717) or CO2 (R744). These lubricants can also be used with natural hydrocarbon refrigerants like propane (R290), propylene (R1270) or butane (R600). 

    Klüber Summit R series lubricants are based on polyalphaolefins. No paraffin is contained in the formulation of this lubricant. However, we cannot rule out the possibility that the lubricant contains traces of paraffin. Depending on the application, we recommend consulting with us. They offer good cold flow properties. They contain base oils of high chemical stability and show a low tendency to evaporation.

    • Klüber Summit R oils are NSF H1 registered for use in the food-processing and pharmaceutical industry and comply
      with FDA 21 CFR Sec 178.3570
    • Low maintenance costs due to extended oil change intervals and reduced oil consumption
    • Easy compressor oil conversion due to neutral behaviour towards seals
    • High efficiency of the refrigeration plant due to reduced oil deposits
    • Low operating costs due to long service life of filters and oil separators
    • Wide range of application with evaporating temperatures, in some cases down to ≥-50°C
    • Meets NSF H1 requirements for use in the food-processing industry (except for Klüber Summit R 500 and R 600)

    Klüber Summit RHT Series

    Benefits

    Paraffin-based mineral oils especially developed for ammonia refrigeration compressors. Klüber Summit RHT 68 and Klüber Summit RHT 100 are refrigeration compressor oils on the basis of highly purified, hydrogenated mineral oils. Klüber Summit RHT 68 and Klüber Summit RHT 100 meet the requirements of DIN 51 5031, KAA.

    Klüber Summit RHT 68 is used for the lubrication of screw-type and reciprocating piston compressors in industrial refrigeration plants. Klüber Summit RHT 100 was especially developed for the operation of reciprocating piston compressors requiring a higher viscosity due to specific operating conditions such as higher operating temperatures in NH3 heat pumps.

    • Klüber Summit R oils are NSF H1 registered for use in the food-processing and pharmaceutical industry and comply with FDA 21 CFR Sec 178.3570
    • Excellent flow characteristics at low temperatures
    • Lower maintenance costs due to long oil change intervals and reduced oil consumption
    • Easier changeover due to neutral behaviour towards seals
    • High refrigeration efficiency due to reduced oil deposits
    • Lower operating costs due to long filter and oil separator lifetimes
    • Lower oil carryover than with naphthene-based mineral oils

    Klüber Summit RAB 68

    Benefits

    Klüber Summit RAB 68 is based on synthetic hydrocarbon oils and special additives. It is very stable at high temperatures while providing excellent low temperature properties at evaporator temperatures below -45 °C. The solubility with the refrigerants listed below is excellent and the deposit formation and foaming tendency is considerably reduced compared to naphthenic refrigeration compressor oils.

    • Klüber Summit R oils are NSF H1 registered for use in the food-processing and pharmaceutical industry and comply
      with FDA 21 CFR Sec 178.3570
    • excellent low-temperature properties at evaporator temperatures below -45 °C
    • completely miscible with mineral oils

    Klüber Summit RHT FG 68

    Benefits

    Refrigeration oil especially for ammonia compressors in the food-processing industry. As an operator of ammonia refrigeration compressors you want your refrigeration units to operate reliably and efficiently. To support you in this, we have developed Klüber Summit RHT FG 68 based on highly refined and hydrogenated white oils especially for the lubrication of ammonia refrigeration compressors.

    As Klüber Summit RHT 68 is highly refined, the oil carryover is considerably lower than with conventional mineral oils. This will help you to reduce oil consumption.

    • Klüber Summit RHT FG 68 is NSF H1 registered for use in the food-processing and pharmaceutical industries and
      complies with FDA 21 CFR Sec 178.3570
    • Efficient refrigerator operation due to the low solubility of the oil in ammonia
    • Reduction of oil consumption is possible due to lower oil carryover in comparison with naphthene-based mineral oils
    • High refrigeration efficiency due to reduced oil deposits
    • Easier changeover due to neutral behaviour towards seals

    Klüber RHB Series

    Benefits

    The RHB Series is formulated from an AB-Alkylbenzene synthetic blend and designed to function under the stringent requirements of CFCs Chlorofluorocarbon, HCFCs- Hydrochlorofluorocarbon refrigerants like R11, R12, R13, R22, R113, R114, R123, R124, R401a, R401b, R402a, R402b, R403b, R406a, R408a, R409a, R500, R502, R503; & R717 (NH3 aka ammonia) DX and liquid overfeed industrial refrigeration systems. Besides its inherent inertness, improved system efficiency and higher productivity.

    • Partial miscibility and solubility with CFCs, HCFCs and ammonia for improved oil return to the compressor;
    • Superior system cleanliness and lubricity to reduce component wear and corrosion;
    • Superior chemical and thermal stability;
    • Lower foaming tendency;
    • Extended oil drain capability

    Klüber Summit RPA 68

    Benefits

    Synthetic compressor oil, particularly for highly loaded ammonia refrigeration plants. Klüber Summit RPA 68 is a refrigeration compressor oil based on synthetic hydrocarbons which are compatible with seals. It complies with the requirements set forth in DIN 51 503-1, KAA (08.97).

    Klüber Summit RPA 68 is free from paraffin and offers good cold flow properties. It contains base oils of high chemical stability and shows a low tendency to evaporation. Klüber Summit RPA 68 is neutral to seals, particularly seals which have already been operated with naphthene-base mineral oils. The product is fully miscible with mineral oils.

    • Low maintenance costs due to extended oil change intervals and reduced oil consumption
    • Easy compressor oil conversion due to neutral behaviour towards seals
    • High efficiency of the refrigerating plant due to reduced oil deposits
    • Low operating costs due to long service life of filters and oil separators
    • Wide range of application with evaporating temperatures down to -53°C

    Klüber Summit RPS 52

    Benefits

    Synthetic compressor oil based on polyglycol for ammonia refrigerating plants using dry evaporation. Klüber Summit RPS 52 is a refrigeration compressor oil based on polyglycol which shows a good miscibility with ammonia. The synthetic base oil ensures good cold flow properties, a high chemical stability to ammonia and low tendency to evaporation.

    Klüber Summit RPS 52 has been designed especially for the lubrication of screw-type compressors in refrigerating plants using ammonia (R 717) and dry evaporation. Unlike mineral oils and polyalphaolefins, Klüber Summit RPS 52 is miscible with ammonia, thus the oil entrained in the refrigeration cycle is recycled to the compressor together with the refrigerant. Therefore, it is no longer necessary to have oil catches in the refrigeration cycle, like in the case of nonmiscible >oils.

    • Low maintenance costs due to extended oil change intervals and reduced oil consumption
    • Reliable operation of the compressor due to stable viscosity under the influence of refrigerants
    • High efficiency of the refrigerating plants due to reduced oil deposits
    • Simplified system configuration as the product can be used with dry evaporation
    • Low operating costs due to long service life of filters and oil separators

    Klüber Summit Supra 26 N, 32, Supra Coolant

    Benefits

    Fully synthetic air compressor oils based on polyglycol. Besides their long oil life, Klüber Summit Supra oils offer you high oxidation stability, leading to less maintenance and lower operating costs. The oils' low tendency to form oxidation residues in the oil cycle extends oil filter and oil separator life and provides good conditions for longer oil change intervals. The oils contain inhibitors especially tuned to the application to additionally act against residue formation in the compressor and designed to enable good compressor efficiency.

    • Low maintenance and operating costs due to oil change intervals up to 8,000 operating hours in oil-injected screwtype compressors and up to 40,000 operating hours in turbocompressors
    • Lower operating costs due to long oil filter and oil separator lifetimes
    • Reduced cleaning costs due to good dirt-dissolving capacity of the ester oil component
    • Good miscibility of oils, hence simpler conversion of compressors previously run with oils based on polyglycol
    • Very good wear protection for steel friction bodies

    Klüber Summit Varnasolv

    Benefits

    Synthetic cleaning concentrate for use in wind turbine gearboxes. Due to its sufficiently high viscosity matching the gear oil, Klüber Summit Varnasolv HV can be added to the oil to clean gears during operation. Klüber Summit Varnasolv HV is a fluid cleaning concentrate designed to dissolve sticky residues, varnish and carbon build-up during operation and keep them suspended in the oil. At the end of the cleaning process, the used oil is drained to flush out the unwanted residues and fresh, clean oil is applied.

    • Low costs for maintenance and cleaning due to effective deposit removal
    • High viscosity formulation matching gearbox operational requirements in wind turbines
    • Klüber Summit Varnasolv HV is neutral towards seals if the maximum recommended concentration of 10 % is not exceeded
    • Cost-saving operation and maintenance of the cleaned gearbox due to longer oil life

    Klüber Summit Varnasolv HV

    Benefits

    Concentrated, synthetic conditioner for compressors, hydraulic systems, gears and other oil circulation systems. Klüber Summit Varnasolv is a concentrated conditioner fluid containing synthetic ester oil and cleaning additives. It is miscible with mineral oils, synthetic hydrocarbons, ester oils and polyglycols.

    Klüber Summit Varnasolv has been especially designed for cleaning screw-type compressors, hydraulic systems, gears and other oil circulating systems like calenders. The conditioner can be used for oils based on mineral oil, synthetic hydrocarbon, ester oil and polyglycol.

    • Dissolves varnish and carbon deposits, thus reducing maintenance and cleaning costs – no dismantling of systems needed prior to cleaning
    • Used during operation, no downtime of machines for cleaning
    • Easy application due to the neutral behaviour towards seals, when added to the compressor oil on 1 to 10 basis
    • Reduced operating and maintenance costs due to higher efficiency (e.g. compressor) and longer service life of the fresh oil fill

    Klüber Xtra-Clean

    Applications

    Klüber Xtra-Clean is a super industrial degreaser and cleaner specially formulated for cleaning oily and greasy surfaces such as oil rings, engines, oilside of heat exchangers, pipes and cleaning vats. A synthetic detergent with anti-redeposition agents to provide non-caustic cleaner.  

    • Dissolves varnish and carbon deposits, thus reducing maintenance and cleaning costs – no dismantling of systems needed prior to cleaning
    • Used during operation, no downtime of machines for cleaning
    • Easy application due to the neutral behaviour towards seals, when added to the compressor oil on 1 to 10 basis
    • Reduced operating and maintenance costs due to higher efficiency (e.g. compressor) and longer service life of the fresh oil fill

    Klüber Sublime

    Benefits

    Sublime is a water-based descaler containing wetting agents, corrosion inhibitors and degreasing compounds. It is designed to penetrate and remove encrusted lime scale, corrosion products, rust and dirt from water-wetted surfaces in equipment. The solution removes lime scale in commercial and industrial applications without costly disassembly. Sublime is non-toxic, non-corrosive and non-flammable.

    • Has a pleasant odor
    • Contains a pale yellow colourd dye which changes to a purple colour when the solution is spent
    • It will remove approximately 1.5 pounds of lime and water scale per gallon of solution.
    • Reduced operating and maintenance costs due to higher efficiency (e.g. compressor) and longer service life of the fresh oil fill

    Privacy Policy             Conditions of Purchase            Conditions of Sale

    Copyright © 2018 Gordon Brothers Industries Pty Ltd  •   All rights reserved